Selling Price -
$5,999.00
2019 Exmark Radius S-Series RAS708GEM483C3
RADIUS S-SERIES
The next generation of zero-turn mowers from Exmark.Exmark Radius S-Series delivers the cut quality and durability professionals demand at an unbeatable value. Powered by Exmark engines, with Hydro-Gear integrated transmissions and up to 9 mph forward ground speed Radius improves productivit. Available with 48-, 52- and 60-inch cutting decks.
Features may include:
ULTRACUT DECK TECHNOLOGYExmark’s exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
HEAVY DUTY UNIBODY FRAMEFully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
QUICK ADJUSTABLE ROLLOVER PROTECTION SYSTEM (ROPS)Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
HEIGHT OF CUT MADE EASYThe patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
- 2019
- Exmark
- Radius S-Series
- RAS708GEM483C3
- Zero-Turn Mower
- Brand: Exmark | Model: 708 | Series: V-Twin
- 708
- 3,600 rpm
- Donaldson Heavy Duty air cleaner
- Engagement: MagStop electromagnetic 125-ft-lb clutch
- Carbureted
- Gas Carbureted | Indicator: Translucent Visual
- Hydro-Drive | Description: Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. | Wheel Release: Allows unit movement without engine running.
- Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Lever-actuated pawl brake.
- Drive: 23 x 9.5-12 K500 | Caster: 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings
- Drive: 23 x 9.5-12 K500
- 12-volt battery with 15-amp alternator.
- Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
- Blade: Approximately 18,500 fpm.
- High back seat with foam padded seat cushion, armrests and integral safety switch
- Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Blade: No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive.
- 48"
- 69.7 inches (177.0 cm) | Cutting: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
- 81.7 in (207.5 cm) | Blades: 3 Blades at 16.25"
- 59.5 in (151.1 cm)
- 7-gallon (26.5-L) single fuel tank with single fill location.
- Standard Features: Engine hour meter, cup holder, tow hitch and jack receiver | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Casters: 48".375" thick caster yoke arms
- Tractor Frame: Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
- Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Floating Deck | Full-floating UltraCut Series 3. | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
- RAE708GEM60300
- 60
- $6,999.00
- $5,999.00
- Ft Worth, Texas
- New
- M60300
- 2019
- Exmark
- Radius S-Series RAS708GEM483C3
- RAE708GEM60300
- Red
- 708cc V-twin
- 24.5
- .0001
- Gas
- Available
- 59.5 in (151.1 cm)
- 69.7 inches (177.0 cm) | Cutting: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
- RAE708GEM60300
- 60